Pro AV Catalog

< Back to Previous Page

CIP-DRS

All Products

SMPTE 2110 and IPMX to SDI Encoder/Decoder

Model: CIP-DRS

12G-SDI I/O
Multi-network support
2x RJ45 (10G & 25G network support for Media and Control)
1x RJ45 (1G network support for independent control network)
Single device that transmits or receives IP signals

View Manufacturers Website

More Product Information Below

Product Info

Tech Specs

Matrox ConvertIP DRS features 12G-SDI, genlock, and three RJ45 ports on a single device. ConvertIP DRS is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can receive power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.

12G-SDI I/O
Multi-network support
2x RJ45 (10G & 25G network support for Media and Control)
1x RJ45 (1G network support for independent control network)
Single device that transmits or receives IP signals
Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
Fanless design for quiet cooling
PTP-derived genlock output support
Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
Compact form factor mounts easily to the back of a monitor
ConvertIP Command Center web interface for managing ConvertIP devices
Complimentary ConvertIP Manager Windows application for simple commission and deployment

Rackmountable - Yes
ROHS Compliant - Yes
Warranty - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Certifications: CE, FCC, ICES, KC, REACH
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 18 Watt
Current Draw: 0.50 Amps
DC Voltage: 12 Volts
Depth: 7.13 in
Height: 1.42 in
Width: 7.53 in
Product Weight: 1.47 lbs
Color: Black
Warranty (Length/Type): 3 years
Video Input: TX mode: 1.5G, 3G, and 12G SDI
Video Output: RX mode: 1.5G, 3G, and 12G SDI
Video Resolution: HD and 4K resolutions (including broadcast)
VANC ancillary data processing: Yes
Audio Input/Output: Up to 16 channels of audio embedded in SDI output signal, Unbalanced analog stereo input via 1/8-inch (3.5mm) jack, Line Level
Network Connector: 3x RJ45 ports: LAN 1 for media and control with PoE+ (1/2.5G), Control LAN for control data only (100/1000 Mbps), LAN 2 for redundant media and control (1/2.5G)
Control and management: Matrox ConvertIP Command Center (web UI), Matrox ConvertIP Manager (software application)
Maximum Video Resolutions: 4096 x 2160 60p
Bit Depth and Color Space: YCbCr 4:2:2 10-bit, SDR/HDR1
Video Scaling: High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing: Yes
Color Space Conversion: Yes
Video: Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content, ProAV Colibri codec included: 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps; JPEG-XS codec upgrade required: 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio: Uncompressed PCM (~1 Mbps/ch)
Latency: Less than a 1/4 frame (<4 ms)
Network Standard: RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP addressing: IPv4, IPv6, DHCP (default) and static IP
Supported Protocols: SMPTE ST 2110 (-10, -22, -30, -401), SMPTE 2059 (-1, -2), IPMX
Command and Control: HTTPS over TCP
Discovery, Registration and Control: NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1
PoE+: Yes (IEEE 802.3at Type 2)
Operating Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m)
Operating Humidity: 20% to 80% non-condensing
Storage Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m)
Storage Humidity: 5% to 95% non-condensing